In a typical transformer, the primary and secondary windings are concentrically wound on a single iron core column, with the low-voltage winding inside and the high-voltage winding outside. (In contrast, the primary and secondary windings of a welding machine transformer are mounted on separate iron core columns.)
When a transformer is operating under load, as the secondary current increases, the primary current must also increase accordingly to maintain a constant main magnetic flux in the iron core and balance the secondary current.
The secondary active power of a transformer is generally calculated as: Transformer rated capacity (KVA) × 0.8 (transformer power factor) = KW.
Power transformers mainly include:
A. A desiccant (silica gel cartridge): This contains silica gel. The insulating oil in the oil conservator (oil tank) is connected to the atmosphere through the desiccant. The desiccant absorbs moisture and impurities from the air to maintain good insulation performance of the transformer's internal windings; however, discoloration or deterioration of the silica gel can easily cause blockages.
B. Oil Level Gauge: Reflects the transformer oil level, generally around +20°C. If too high, drain oil; if too low, add oil. In winter, when temperatures are low and the load is light, the oil level change is minimal, or it may drop slightly. In summer, when the load is heavy, the oil temperature rises, and the oil level also rises slightly; both are normal.
C. Oil Tank: Adjusts the oil level in the tank and prevents excessive oxidation of the transformer oil. It has a filler hole at the top.
