In a typical transformer, the primary and secondary windings are concentrically wound on a single iron core column, with the low-voltage winding inside and the high-voltage winding outside. (In a welding machine transformer, the primary and secondary windings are mounted on separate iron core columns.)
Grounding of Power Transformers
1. The transformer casing should be reliably grounded. The neutral wire and neutral point grounding wire should be laid separately, and the neutral wire should not be buried underground.
2. The neutral point grounding circuit of the transformer should have a detachable connection bolt near the transformer.
3. For transformers equipped with valve-type surge arresters, the grounding should meet the requirement of a three-in-one system; that is, the transformer neutral point, transformer casing, and surge arrester grounding should be connected to a common ground.
4. The grounding resistance should be ≤4 ohms.
