Working Principle Of Power Transformer

Sep 08, 2026 Leave a message

In domestic transformers, the high-voltage windings are generally connected in a Y-connection. The connection method for the medium-voltage and low-voltage windings depends on the system conditions. The system conditions refer to the relationship between the voltage phasors of the high-voltage transmission system and the voltage phasors of the medium-voltage or low-voltage transmission system. For low-voltage distribution systems, the connection method can be determined according to standard regulations.

 

High-voltage windings are often connected in a Y-connection because the phase voltage can be equal to 57.7% of the line voltage, allowing for a lower voltage per turn.

 

In domestic 500kV, 330kV, 220kV, and 110kV transmission systems, the voltage phasors are in phase. Therefore, for three-phase three-winding or three-phase autotransformers with these voltage ratios, both the high-voltage and medium-voltage windings should be connected in a star configuration. When using a three-phase three-core structure, the low-voltage winding can also be connected in a star or delta configuration, depending on whether the voltage phasors of the low-voltage transmission system are in phase with or lag the voltage phasors of the medium-voltage and high-voltage transmission systems by 30° electrical angle.