AC contactor selection principles

Oct 19, 2026 Leave a message

The working principle of an AC contactor is to utilize the combination of electromagnetic force and spring force to achieve the connection and disconnection of contacts. An AC contactor has two operating states: de-energized (released) and energized (operated).

 

The rated voltage of the main contacts must not be less than the rated voltage of the control circuit. The rated current of the main contacts should meet the load requirements; for resistive loads, it should be equal to the rated current, and for motor loads, it should be slightly greater than the rated current. The voltage of the attraction coil is selected according to the complexity of the control circuit; simple circuits can use 380 V or 220 V, while complex circuits can use 36 V or 110 V. The number and type of contacts must meet the basic standards of the control circuit.

info-800-800