AC contactor installation and maintenance

Oct 20, 2026 Leave a message

Pre-installation checks require confirming that the contactor's technical data conforms to standards, such as rated voltage, current, and operating frequency. Also, check for any external damage, ensure smooth operation, and measure the coil's DC resistance and insulation resistance. The installation position should be vertical, with an inclination not exceeding 5°, and the ventilation holes should face vertically.

 

During installation and wiring, prevent screws, washers, terminals, and other parts from falling out, which could cause the AC contactor to jam or short-circuit. After installation, the wiring must be checked for correctness. With the main contacts de-energized, energize and disconnect the contactor several times to check for main contact operation and noise upon core engagement. Only after confirming everything is correct should the contactor be put into use. Connecting the AC contactor to a DC power supply is strictly prohibited, as this will burn out the coil.

info-800-800